Jabsco Sliding Vane Diesel Transfer Pump - 9 GPM - 24V

Jabsco Sliding Vane Diesel Transfer Pump - 9 GPM - 24V is a compact, high-performance self-priming pump engineered to refuel small diesel-powered equipment from drums. With a capacity of 9 GPM (35 L/min) and a robust 24V motor, this pump delivers fast, reliable fueling for portable machines and vehicles, keeping downtime to a minimum.

Designed for drums and small tanks (typical sizes up to 200 litres / 50 US gallons), it is ideal for refueling a wide range of equipment on job sites. Its versatility makes it suitable for mounting to excavators, cranes, road rollers (compactors), pavers, agricultural machines, generators, and even helicopters.

Key benefits

• Fast fueling at 35 litres per minute (9 GPM) for quick turnaround on site.
• High head capability up to 6 meters (19 feet) to lift fuel from drums into higher tanks or equipment.
• Self-priming up to 2.8 meters (9 feet) for reliable operation from drum sources.
• Weather-resistant design with IP55-protected motor for outdoor and harsh environments.
• Wide fluid compatibility suitable for diesel fuel, kerosene, paraffin, hydraulic oils, and oils up to 150 cSt (750 SUS) viscosity.
• Durable construction aluminium pump body, Vectra rotor, PTFE-filled Ryton vanes, steel shaft, and nitrile lip seal for long life.
• Compact, maintenance-friendly design with vertical ports and straightforward connections.
• Efficient operation low current draw with 7 A at 3 m head and a maximum of 10 A, supporting extended use on site.
• Duty limited to 25 minutes @ 40°C (104°F), ensuring safe, controlled operation during fueling tasks.

Technical specifications

• Flow rate: 9 GPM (35 L/min)
• Head: 6 meters (19 feet)
• Self-priming: up to 2.8 meters (9 feet)
• Motor: 24V permanent magnet, IP55 protected
• Duty: 25 minutes @ +40°C (104°F)
• Current draw: 7 A @ 3 m head; Maximum: 10 A
• Pump body: Aluminium
• Rotor: Vectra
• Vanes: PTFE-filled Ryton
• Shaft: Steel
• Seal: Nitrile lip seal
• Ports: Vertical 1/2" BSP or 19 mm hose adaptors (3/4" option)
• Fluids supported: Diesel, Kerosene, Paraffin, Hydraulic oils up to 150 cSt
• Manufacturer: Jabsco
• Part number: 23870-1300