Victron Lynx Smart BMS 1000 NG (M10) MGMT System

Meet the Lynx Smart BMS NG 1000A (M10) MGMT System — a dedicated Battery Management System built for Victron Lithium NG LiFePO4 batteries. Engineered to support 12.8 V, 25.6 V, and 51.2 V configurations, it scales from a compact setup to a massive energy bank by mounting up to 50 batteries in a single system. That yields up to 192 kWh in a 12 V arrangement and up to 384 kWh in 24 V or 48 V configurations, empowering large-scale off-grid, marine, and mobile applications with confidence.

Key features

• High-current protection: Built-in 1000 A (or 500 A) contactor ensures a robust, reliable safety cutoff for the battery bank.
• Secondary safety system: Acts as a fail-safe if primary controls (ATC, ATD, and/or DVCC) fail, safeguarding your energy system.
• Remote main switch capability: Serves as a remote controllable main system switch for convenient isolation.
• Pre-charge circuit: Prevents high inrush currents when connecting capacitive loads like inverters, reducing stress on components.
• Smart monitoring & control: Bluetooth connectivity via VictronConnect, plus VE.Can connectivity with GX devices (Cerbo GX, Ekrano GX) and the VRM portal for real-time oversight.
• Comprehensive readouts: Real-time cell voltages and temperatures are accessible on GX devices and through the VRM portal.
• Integrated battery monitoring: Provides state of charge, voltage, current, historical data, and status insights at a glance.
• DVCC closed-loop control: Coordinated operation with ATC/ATD contacts for seamless charger and load management.
• Programmable relay: Use as an alarm relay or to control an alternator via its external regulator (ignition cable).
• AUX power for post-BMS loads: Onboard auxiliary supply (1.1 A at system voltage) powers specific loads after shutdown.
• Automatic safety shutdowns: BMS and AUX automatically shut down if no charge voltage is detected within 5 minutes after a low voltage event.
• Seamless marine and vehicle networking: VE.Can and NMEA 2000 data communication deliver easy integration with marine networks and GX devices.
• System compatibility: Works with Victron inverter/chargers, Orion XS 12/12-50A DC-DC charger, and solar charge controllers—automatically controlled via a connected GX device and DVCC.

Seamless integration and intelligent control

The Lynx Smart BMS NG is designed to slot neatly into the Lynx Distributor ecosystem and with your GX devices. Bluetooth and VE.Can connectivity provide flexible monitoring options, while NMEA 2000 ensures easy marine network integration. The DVCC-based closed-loop control and ATC/ATD contacts allow automatic coordination with other chargers and loads, so you can run a balanced, safe, and efficient power system with minimal manual adjustments.

Why choose the Lynx Smart BMS NG 1000A (M10) MGMT System

• Powerful safety and control: A hardened defense layer combining a high-current contactor, pre-charge circuit, and automatic shutdown features.
• Scalability and flexibility: Configurable for 12 V, 24 V, or 48 V systems with up to 50 LiFePO4 cells, enabling large energy storage capacities.
• Full visibility: Real-time metrics, historical data, and cell-level readouts accessible on GX devices and VRM portal.
• Smart integration: Effortless compatibility with Victron inverter/chargers, DC-DC chargers, solar controllers, and marine networks.

Elevate your energy system with the Lynx Smart BMS NG 1000A (M10) MGMT System — the premier BMS choice for serious LiFePO4 setups that demand safety, visibility, and scalable performance within the Victron ecosystem.