Jabsco Impeller Kit - 6 Blade - Neoprene - 1-9/16" Diameter

Meet the Jabsco Impeller Kit — a 6‑blade neoprene impeller designed for dependable engine cooling, bilge, transfer, and general‑purpose pumps.

• Material: Neoprene
• Blade count: 6 blades
• Diameter: 1-9/16"
• Shaft width: 15/32"
• Shaft diameter: 3/4"
• Drive type: Slotted shaft - pin drive
• Insert material: Brass

Overview: Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general‑purpose pumps. These impellers are subjected to rigorous quality processes to ensure reliable, efficient and long‑lasting performance.

Maintenance and replacement

• Replace all impellers at least once every year, or sooner, depending on engine duty.
• With correct installation, an impeller may last several years, but a preventive maintenance schedule is advisable.
• Replacement is easy: remove the end cover screws, then use either a Jabsco Impeller Removal Tool or channel‑lock pliers to grip the hub. Do not use screwdrivers, as they may damage the pump face and pose a safety risk in confined spaces.
• Always grease new impellers to ease installation and to provide added protection during initial prime.
• After replacing the gasket and end cover, the pump is ready to use.

• Always carry spare impellers on board in case of emergency.
• The impeller is a vital component of the engine cooling system and should be treated as such.

Safety notice: WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer details: Jabsco | Part No: 22405-0001-P | UPC: 671880574747