Victron Blue Smart IP22 24VDC 12A 1 Bank 120V Charger - Dry Mount

Meet the Victron Blue Smart IP22 24VDC 12A 1 Bank 120V Charger - Dry Mount, a professional-grade battery charger with built-in Bluetooth for effortless wireless monitoring and tuning. Designed to handle devices in your workshop and vehicles—from classic cars and motorbikes to boats and camper-vans—the Blue Smart IP22 delivers intelligent charging any time, anywhere.

Smart, efficient, and versatile

• Bluetooth Smart: wirelessly monitor voltage and current, adjust settings, and update firmware for ongoing improvements.
• Adaptive 6-stage charging: test – bulk – absorption – recondition – float – storage for optimal battery health and longevity.
• High efficiency up to 94% with significantly less heat generation; idle power consumption as low as 0.5 W.
• Storage mode: minimizes maintenance and aging when the battery is idle by reducing float voltage and periodically reabsorbing to prevent sulfation.
• Li-ion compatibility: supports Li-ion chemistries with a simple bulk – absorption – float algorithm.
• Fully discharged battery recovery: capable of re-initiating charging even if the battery has been discharged to zero volts.
• Night and Low modes: output current is reduced to 50% for quiet operation; Night mode ends after 8 hours, Low mode can be ended manually.
• Overheat protection: if the temperature rises, output current automatically reduces to prevent failure.
• 11 LEDs provide clear status: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY, with MODE options NORMAL (14.4V) / HIGH (14.7V) / RECONDITION / LI-ION.
• One-output design with 1 bank, suitable for 24V systems and can be used as a reliable power supply.
• Dry Mount construction for secure, space-saving installation in vehicles or workshops.

Key specifications

• Input Voltage Range: 100 - 130 VAC
• Charge Current, Normal Mode: 8/12/16 A
• Charge Current, NIGHT or LOW: 4/6/8 A
• Efficiency: 94%
• No Load Power Consumption: 0.5 W
• Frequency: 45 – 65 Hz
• Number of Outputs: 1
• Charge Voltage 'Absorption': Normal 28.8V, High 29.4V, Li-ion 28.4V
• Charge Voltage 'Float': Normal 27.6V, High 27.6V, Li-ion 27.0V
• Charge Voltage 'Storage': Normal 26.4V, High 26.4V, Li-ion 27.0V
• Charge Algorithm: 6-stage adaptive
• Can Be Used as Power Supply: Yes
• Protection: Battery reverse polarity (fuse); Output short circuit; Over temperature

Built to endure demanding environments with a robust dry-mount design, the Victron Blue Smart IP22 Charger is a future-proof solution for reliable, intelligent charging in any setting—whether you’re in the workshop or on the road.