Victron Orion-TR DC-DC Converter - 24 VDC to 24 VDC - 280W - 12AMP Isolated

Victron Orion-TR 24/24-12A (280W) Isolated DC-DC Converter is a compact, rugged power solution designed to convert 24 VDC to a stable 24 VDC output with isolation for safer, more versatile automotive, marine, and off-grid systems. This isolated model features separate input and output (-) leads and a remote on/off terminal, making installation safer and control effortless.

• Isolated 24 VDC to 24 VDC conversion delivering up to 280 W with clean, reliable output.
• Remote On/Off terminal eliminates the need for a high-current switch in input wiring; operate it with a low-power switch or engine run/stop signals.
• Paralleling capability – short circuit proof and can be paralleled with unlimited units to increase output current.
• High temperature protection reduces output current at high ambient temperatures to protect the system.
• IP43 protection when installed with screw terminals oriented downward for rugged environments.
• Screw terminals allow easy installation with no special tools required; input fuse (not replaceable) applies to 12 V and 24 V input models only.
• Adjustable output voltage (not intended for battery charging; consider Orion-Tr Smart for charging applications).

Specifications

• Input Voltage Range: 16–35 V
• Under Voltage Shut Down: 14 V
• Under Voltage Restart: 15 V
• Nominal Output Voltage: 24.2 V
• Output Voltage Adjust Range: 20–30 V
• Output Voltage Tolerance: +/- 0,2 V
• Output Noise: 2 mV rms
• Continuous Output Current at Nominal Output Voltage and 40°C: 12 A
• Maximum Output Current (10 s) at Nominal Output Voltage: 15 A
• Short Circuit Output Current: 30 A
• Continuous Output Power at 25°C: 320 W
• Continuous Output Power at 40°C: 280 W
• Efficiency: 89%
• No Load Input Current: < 80 mA
• Galvanic Isolation: 200 VDC between input, output, and case
• Operating Temperature Range: -20 to +55°C (derate 3% per °C above 40°C)
• Humidity: Max. 95% non-condensing
• DC Connection: Screw terminals
• Maximum Cable Cross-Section: 16 mm² (AWG 6)
• Weight: 1.3 kg (3 lb)
• Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 in)
• Safety Standards: EN 60950
• Immunity Standards: EN 61000-6-3, EN 61000-6-1, EN 55014-2
• Automotive Directive Standards: ECE R10-5

Note: This converter is not intended for battery charging. For battery charging applications, consider using an Orion-Tr Smart charger. For support, returns, or repairs, please contact your dealer.